UV Controller Oman – Best SATEPA The Cube UV³ Smart Ballast & Lamp Monitor

UV controller Oman: SATEPA The Cube UV³ Controller by SATEPA, Italy, built for single lamp and double lamp UV systems with vapour mercury or amalgam lamps, in stainless steel or HDPE chambers. Supplied, installed and serviced by UV Water Systems, Muscat.

SKU: SAT-CUBE
Category:
Tags: , ,

Description

UV controller Oman: the SATEPA The Cube UV³ Controller from SATEPA Srl, Italy, is built for single lamp and double lamp UV systems with vapour mercury or amalgam lamps, in stainless steel or HDPE chambers. Its control software keeps sterilization reliable even with interrupted water flow, and it connects to irradiance and temperature sensors for full monitoring.

SATEPA has designed UV electronics since 2007 and manufactures UV sterilizers from 0 to 600 m³/h in Bologna, Italy, using its own ballasts and controllers. UV Water Systems supplies, installs and services SATEPA equipment across the Sultanate.

How the SATEPA The Cube UV³ Controller Works

UV-C light at 253.7 nm disrupts the DNA and RNA of bacteria, viruses and protozoa so they cannot reproduce. Treatment happens instantly as water passes the lamps, with no chemicals added, no change in taste or odour, and no harmful by-products. For reliable results the water should be clear and pre-filtered, with low iron and manganese and good UV transmittance.

Key Features of the UV controller Oman Range

  • White/blue 2×8 character backlit display
  • Single lamp management with lamp change counter
  • Total plant hour counter and partial lamp hour counter with end-of-life alarm (LED and relay)
  • “Flow water” mode with lamps managed by flow sensor, “Lamp on” mode, timer mode
  • “Solenoid valve” mode that closes the outlet on lamp fault
  • Stand-by button, remote on/off, customizable input
  • Free contact alarm relay and powered alarm relay (1 A @ 30 Vdc; 0.25 A @ 230 Vac)
  • Optional irradiation and temperature sensor; IP54 (IP65 optional); 180 x 180 x 90 mm

Models and Technical Specifications

Parameter Value
Display 2×8 character, white/blue backlight
Lamps 1 lamp (vapour mercury or amalgam)
Relays Free contact + powered alarm relay
Relay rating 1 A @ 30 Vdc; 0.25 A @ 230 Vac
Protection IP54 (IP65 optional)
Dimensions 180 x 180 x 90 mm
Origin SATEPA, Italy

Custom systems are available on request. Flow rates are given by SATEPA at the stated UV dose; we size each unit to your actual water quality.

Applications in Oman

  • Upgrading old UV systems with basic ballasts
  • Hotel, hospital and food plant UV units that need alarms
  • UV systems with solenoid valve shut-off for safety
  • OEM UV skids that need a branded controller

Choosing the Right Model

Model selection depends on peak flow rate, water source (municipal, well, tanker or seawater), UV transmittance, temperature and the required dose. In Oman, well and tanker water often carries iron, hardness or turbidity, so we check pre-treatment as part of every proposal. Send us your flow rate and a recent water test report and our engineers will recommend the model and the filters or softener needed ahead of it. Learn more about ultraviolet germicidal irradiation.

Installation and Maintenance

  • Install after pre-filtration, with a bypass line and isolation valves for service
  • Replace UV lamps every 9,000 hours (14,000 hours for amalgam), about once a year in continuous use
  • Clean the quartz sleeve every 3 to 6 months, more often with hard water
  • Keep the controller and ballast in a dry, ventilated place

Why Buy UV controller Oman Equipment from UV Water Systems

UV Water Systems is an ISO 9001:2015 certified water treatment company in Muscat with 14+ years in Oman. We offer site survey, sizing, installation, spare lamps and quartz sleeves from stock, and annual maintenance contracts. See our other UV systems or contact us for a quotation.

Frequently Asked Questions

Can The Cube fit my existing UV sterilizer?

In most cases yes, if the lamp power matches. Send us the lamp model and wattage and we will confirm compatibility.

Is SATEPA equipment made in Italy?

Yes. SATEPA Srl manufactures its UV sterilizers, ballasts and controllers in San Giovanni in Persiceto, Bologna, Italy.

Do you deliver and install outside Muscat?

Yes. We supply and install across Oman, including Sohar, Nizwa, Sur, Salalah and Duqm. Call or WhatsApp +968 9763 7786 for pricing.

Reviews

There are no reviews yet.

Be the first to review “UV Controller Oman – Best SATEPA The Cube UV³ Smart Ballast & Lamp Monitor”

Your email address will not be published. Required fields are marked *