UV Water Systems supplies, installs and services boiler water treatment in Oman for steam and hot water plant: softeners, RO and DM units, deaerator chemistry, dosing skids and a monthly testing routine. We work to your boiler maker’s plate limits, not to a generic programme, and we start from your feed water analysis.
On this page
What our boiler water treatment in Oman service covers
- Feed water analysis and interpretation against your boiler pressure band
- Duplex softeners, multimedia filtration and iron removal
- RO and DM units where silica, TDS or chloride exceed what softening can fix
- Oxygen scavenger, phosphate or polymer and amine dosing skids on Emec metering pumps
- Blowdown control, conductivity controllers and blowdown heat recovery
- Condensate recovery, conductivity trips and pre-boiler corrosion control
- Monthly feed, boiler and condensate testing with dated reports
- Operator training on the daily log and action limits
Service packages
We price boiler water treatment in Oman as equipment plus a recurring programme, never as one bundled figure, so you can see what you are buying.
Four packages cover most sites. All prices on application after a site survey, since scope depends on boiler rating, pressure and feed water source.
BWT-1 — Analysis and programme design
Full feed, boiler and condensate analysis, a written treatment programme against your plate limits, chemical selection and a dosing schedule. Suits a site that already has equipment and wants the chemistry corrected.
BWT-2 — Dosing skid supply and commissioning
Two or three line dosing skid with metering pumps, tanks, injection points and calibration, commissioned against measured residuals. Includes the first month of testing.
BWT-3 — Pre-treatment supply and installation
Duplex softener, multimedia filter, iron removal or RO unit sized to your feed analysis and steam demand, supplied, installed and commissioned with a test certificate.
BWT-4 — Annual maintenance contract
Scheduled visits with softener servicing, dosing adjustment, blowdown review, monthly water testing and a dated report for your insurer and HSE auditor. Chemical supply included or on call-off, as you prefer. This is how most of our boiler water treatment in Oman customers run long term.
Why boiler water treatment in Oman needs local design
Most sites here run on desalinated municipal supply, well water, or a blend. Desalinated water arrives low in hardness but often aggressive with free carbon dioxide and little buffering, so it attacks the condensate return before it touches the boiler. Well water is the opposite: high hardness, silica and chloride beyond what a softener alone will hold. Add high ambient temperature at the feed tank, which hurts deaeration, and low condensate return on many plants, and a copied European programme will not hold your limits.
The six limits we design to, with the reasoning behind each, are set out in our guide to boiler feed water treatment in Oman, and in Arabic at معالجة مياه تغذية الغلايات في عمان. The ASME consensus guidelines on water quality for boilers remain the reference most boiler makers write into warranty conditions.
Sectors we serve
We handle boiler water treatment in Oman across every steam user that cannot afford an unplanned shutdown.
Hotels and laundries, food and beverage plants, hospitals with sterilisers and central steam, oil and gas contractors, and industrial users across Muscat, Sohar, Salalah and the interior. We are ISO 9001:2015 certified and registered with the Oman Tender Board and JSRS.
How to start
Send a feed water analysis and your boiler plate data, or ask for a site survey and we will take the samples ourselves. You get a sizing proposal with the treatment train, the dosing programme and the testing schedule priced separately, so you can see what is equipment and what is recurring. Good boiler water treatment in Oman is a budget line you plan, not an emergency you pay for twice.
Call +968 9763 7786 or email sales@waterfilteroman.com. For related work see well water treatment in Oman and cooling tower scale treatment.
Frequently asked questions
Do you supply chemicals as well as equipment?
Yes. Oxygen scavengers, phosphate and polymer conditioners, alkalinity builders and amines, dosed by measured residual rather than a fixed litres per day figure.
Can you take over an existing programme from another supplier?
Yes. We start with a full analysis and a review of your current dosing and blowdown, then correct what is out of specification. Boiler water treatment in Oman changes hands often and the handover is routine.
What does a visit include?
Softener check and hardness test on the treated line, dosing pump calibration and residual testing, blowdown and conductivity controller review, feed, boiler and condensate sampling, and a dated report.
How fast can you respond to a scale or corrosion problem?
Same or next working day for a site visit in Muscat for existing contract customers. Send photographs of the tube surfaces or the last inspection report with your enquiry and we can advise before the visit.