Description
The sodium ferrate water treatment system produces sodium ferrate (Na₂FeO₄) on site, on demand, by membrane electrolysis. One reagent does four jobs at once: it oxidises, coagulates, flocculates and disinfects. UV Water Systems supplies this sodium ferrate technology in Oman for oil and gas produced water, industrial wastewater, camps and remote sites, and for any facility that needs to remove heavy metals, ammonia, hydrocarbons and pathogens in one step.
Industrial operators in Oman face strict discharge and reinjection limits, high water temperatures and long supply lines for treatment chemicals. Generating sodium ferrate on site removes the need to transport and store hazardous chemicals such as chlorine gas, and the only by-product is iron hydroxide, Fe(OH)₃, which is environmentally neutral.
On this page
- How sodium ferrate works
- Sodium ferrate benefits
- Comparison with other technologies
- Proven results
- System sizes
- Why UV Water Systems
How the Sodium Ferrate System Works
The system is a complete treatment train, not just a chemical:
- On-site electrochemical synthesis – a membrane electrolysis unit (Ferrator) produces sodium ferrate automatically, matched to demand. No chemical transport hazards.
- Automated dosing – real-time water quality measurement controls the dose.
- Optimised contact chamber – oxidation, coagulation and disinfection take place together.
- Gravity separation – metal precipitates and suspended solids settle out.
- Activated carbon filtration – final polishing captures trace contaminants below limit values.
- Integrated monitoring – remote diagnostics and real-time data for the operator.

Sodium Ferrate Benefits: Four Functions in One
- Powerful oxidiser – oxidation-reduction potential of 2.2 V, higher than ozone and chlorine.
- Coagulant and flocculant – about two times the coagulation power of conventional aluminium or iron salts.
- Disinfectant – destroys E. coli, coliforms and viruses with no residual chlorine.
- Removes a wide range of contaminants – heavy metals (Pb, Cd, Hg, Ni, Zn, Cu), PFAS and persistent organics, oil products and hydrocarbons, ammonia (NH₃-N), hydrogen sulfide and suspended solids.
- Lower cost – roughly half the treatment cost of chlorine, with simple operation.
- Works in cold or hot water – reliable performance across operating temperatures.
- Safe by-product – decomposes to Fe(OH)₃, an environmentally neutral iron hydroxide.
Sodium Ferrate vs Other Treatment Technologies
| Feature | Ferrate | Chlorine | Ozone | UV | Al/Fe salts | UF/RO |
|---|---|---|---|---|---|---|
| Removes heavy metals | Yes | No | No | No | Yes | Yes |
| No residual chlorine | Yes | No | Yes | Yes | Yes | Yes |
| Capital cost | Low | Low | High | High | Low | Very high |
| Maintenance cost | Medium | Medium | High | Low | Medium | High |
| System complexity | Simple | Medium | Complex | Complex | Medium | Very complex |
Sodium ferrate is the only technology in this group that combines full disinfection with heavy metal removal.
Sodium Ferrate Results from Field Tests
Oilfield produced water for reinjection
| Parameter | Before | After | Reduction |
|---|---|---|---|
| Silica, SiO₂ (mg/L) | 111.7 | 0.4 | 99.6% |
| Sulfides, HS⁻ (mg/L) | 204.5 | 13.1 | 93.6% |
| Calcium / Magnesium (mg/L) | 36 / 14.6 | 0.0 | 100% |
| Oil products (mg/L) | 12.7 | 5.48 | 2.3× |
| Chloride, Cl⁻ (mg/L) | 187 | 0 | 100% |
Water for reservoir pressure maintenance
| Parameter | Raw water | Treated | Limit |
|---|---|---|---|
| Suspended solids (mg/L) | 175 | 12.4 | 12.75 |
| Oil products (mg/L) | 0.271 | 0.042 | 0.1 – 0.3 |
| Hydrogen sulfide (mg/L) | 0.076 | 0.003 | – |
| Total coliforms (CFU/100 mL) | 30,000 | 250 | <500 |
| BOD₅ (mg O₂/L) | 151 | 0.5 | 3.0 |
| COD (mg O₂/L) | 445 | 20 | 30 |
Ammonia-contaminated petrochemical water
Five petrochemical process water samples were treated without any pre-treatment. In one sample, COD fell from 2,431 to 156 mg/L and NH₃-N from 6,100 to 316 mg/L. In another, COD fell from 51,450 to 5,983 mg/L and NH₃-N from 20,100 to 3,640 mg/L.
Sodium Ferrate System Sizes
| Size | Reagent output | Power | Footprint | Typical use |
|---|---|---|---|---|
| Small | Up to 5 L/day | <5 kW | <2 m² | Camps, remote sites |
| Medium | Up to 50 L/day | 5 – 50 kW | 5 – 20 m² | Facilities, operations |
| Large | Up to 500 L/day | >50 kW | Custom | Full site integration |
All sizes come with pre-engineered components, integrated automation, remote diagnostics and rapid installation.
Applications
- Oil and gas produced water treatment and reinjection water
- Industrial and petrochemical wastewater with ammonia, COD and hydrocarbons
- Heavy metal removal from mining and process water
- Camp and remote-site water and wastewater disinfection
- Pre-treatment ahead of industrial RO plants and wastewater treatment systems
Read more about the chemistry of ferrate(VI) on Wikipedia.
Why Choose UV Water Systems for Sodium Ferrate Treatment
UV Water Systems is an ISO 9001:2015 certified water treatment company in Muscat, serving oil companies, hospitals, government entities and industry across Oman. We assess your water, arrange on-site pilot testing, size the sodium ferrate system for your flow and limits, and support installation and long-term operation.
Every project is custom. Contact us or call +968 9763 7786 to discuss your application and schedule a pilot test.





Reviews
There are no reviews yet.