Trojan UVMax 602806 Replacement UV Lamp – for E, E4, E+, E4+, Pro7 | UV Water Systems Oman

ر.ع.32.80

Replacement UV lamp for Trojan UVMax systems, part number 602806. Fits UVMax E, E Plus, E4, E4 Plus, Pro7 and UVMax-28 chambers. 254 nm germicidal output, 9,000-hour rated life. Stocked in Muscat by UV Water Systems for Oman-wide supply.

Description

Trojan 602806 UV lamp Oman — Replacement lamp for UVMax E, E4 and Pro7 systems

Trojan 602806 UV lamp Oman

The Trojan 602806 UV lamp is the replacement germicidal bulb for Trojan UVMax E, E Plus, E4, E4 Plus, Pro7 and UVMax-28 systems, and UV Water Systems holds it in stock in Muscat. Trojan UVMax units are widely installed on villa and light commercial water lines in Oman, and 602806 is the single most requested UVMax spare we supply.

UVMax controllers count lamp hours and alarm at 12 months. Silencing that alarm without changing the lamp is common and expensive in the wrong way — the controller is not being fussy, it is telling you the dose has fallen below the design point. Change the lamp, reset the timer, and the system goes back to doing what it was installed to do.

Trojan 602806 UV lamp Oman — technical specifications

Part number 602806
System family Trojan UVMax
Type Low-pressure mercury germicidal
Wavelength 254 nm
Rated life 9,000 hours / 12 months
Fitted with Quartz sleeve 602733 (sold separately)
Germicidal output 254 nm UV-C
Rated service life 9,000 operating hours (approx. 12 months continuous)
Supplied by UV Water Systems — Uniqueness View LLC, Muscat, Oman

Trojan 602806 UV lamp Oman — compatibility and cross-references

  • Trojan UVMax E
  • Trojan UVMax E Plus (E+)
  • Trojan UVMax E4
  • Trojan UVMax E4 Plus (E4+)
  • Trojan UVMax Pro7
  • Trojan UVMax-28
  • Viqua-branded equivalents of the above chambers

Order the matching quartz sleeve (602733) if the existing sleeve is scaled, etched or cracked. In Oman’s hard groundwater a sleeve rarely lasts more than three to four lamp changes before scale etching permanently reduces UV transmission through the glass.

Where the Trojan 602806 UV lamp Oman is used

Trojan UVMax systems in Oman are typically fitted on villa whole-house lines, small clinics and dental surgeries, cafés, salons and offices, and as final disinfection after RO on drinking water loops. Our technicians cover Muscat, Sohar, Nizwa, Salalah and Duqm and can carry out lamp change, sleeve clean and system check in a single visit.

When to replace your Trojan 602806 UV lamp Oman

UV-C output decays long before the lamp stops lighting. A germicidal lamp still glowing at 15 months may be delivering well under the dose its chamber was sized for, which means the water leaving the system is no longer being disinfected to specification. Replace on hours, not on appearance. For systems running continuously, that means once every 12 months. Log the change date on the controller or on the chamber label so the next service is scheduled rather than remembered.

Handle the quartz sleeve at the same visit. Scale and iron deposits on the sleeve block UV-C just as effectively as a weak lamp, and in Oman’s high-hardness groundwater sleeves foul faster than most manufacturers’ generic guidance assumes. Clean the sleeve with a mild acid descaler, inspect the O-rings, and replace the sleeve outright every three to five years.

Standards and references

The UV dose a chamber must deliver, and the reasoning behind the annual lamp change, come from published drinking water guidance rather than from equipment marketing. The WHO Guidelines for Drinking-water Quality set out the microbiological targets disinfection is designed to meet, and the International Ultraviolet Association publishes the dose and validation practice the industry works to. We size and service UV systems in Oman against those references.

Buying Trojan 602806 UV lamp Oman in Oman

UV Water Systems has supplied and serviced ultraviolet disinfection equipment across the Sultanate for more than 14 years, for hospitals, oil and gas sites, schools, hotels, food and beverage plants and villas. We stock germicidal lamps and ballasts in Muscat rather than ordering them in after a failure, so a plant that loses disinfection on a Sunday morning is not waiting three weeks for an air freight shipment.

Every lamp we supply is a named-manufacturer part with traceable 254 nm output data — the documentation health authority and HACCP auditors in Oman ask for. Our technicians cover Muscat, Sohar, Nizwa, Salalah and Duqm, and can carry out the lamp change, sleeve clean and UV intensity check as one visit under an annual maintenance contract.

Uniqueness View LLC is ISO 9001:2015 certified. Call +968 9763 7786 or email sales@waterfilteroman.com for stock availability, bulk pricing on service-contract quantities, or help identifying the correct lamp for a chamber you cannot find a part number on. Send us a photo of the old lamp and the chamber label and we will identify it for you.

See also our UV sterilizer systems, replacement quartz sleeves and electronic UV ballasts.

Additional information

Brand

Trojan UVMax

Part Number

602806

Wavelength

254 nm

Lamp Life

9,000 hours

Fits

E, E+, E4, E4+, Pro7, UVMax-28

Reviews

There are no reviews yet.

Be the first to review “Trojan UVMax 602806 Replacement UV Lamp – for E, E4, E+, E4+, Pro7 | UV Water Systems Oman”

Your email address will not be published. Required fields are marked *