Description
SS cartridge filter housing Oman: the SATEPA Cartridge Filter Housing from SATEPA Srl, Italy, is built for RO pre-filtration, pool systems and industrial water lines. These AISI 304 stainless steel housings hold 3 to 7 cartridges of 20″, 30″ or 40″ length and handle 15 to 44 m³/h (66 to 196 GPM), with a V-clamp or swing bolt closure for quick cartridge change.
SATEPA has designed UV electronics since 2007 and manufactures UV sterilizers from 0 to 600 m³/h in Bologna, Italy, using its own ballasts and controllers. UV Water Systems supplies, installs and services SATEPA equipment across the Sultanate.
How the SATEPA Cartridge Filter Housing Works
Water enters the housing, passes from the outside to the inside of the filter elements and leaves through the central outlet. Suspended solids, sand, rust and other particles stay trapped in the media. As the element loads, differential pressure rises; when it reaches about 1 bar above the clean value, the element is changed through the quick-open lid without removing the housing from the line.
Key Features of the SS cartridge filter housing Oman Range
- Flow rate 15 to 44 m³/h
- AISI 304 stainless steel enclosure
- Accepts DOE or 222 cartridges, 20″, 30″ and 40″ length
- Quick cartridge change with V-clamp or swing bolt hinged lid
- Drain and vent ports ½”
- Pressure rating 7 bar or 10 bar version
Models and Technical Specifications
| Model | Flow (m³/h) | Flow (GPM) | Inlet/Outlet | Cartridges |
|---|---|---|---|---|
| CF34P15B | 15 | 66 | 1¼” | 3 x 40″ |
| CF520P2B | 18 | 79 | 1¼” | 5 x 20″ |
| CF530P2B | 25 | 110 | 2″ | 5 x 30″ |
| CF540P2B | 34 | 150 | 2″ | 5 x 40″ |
| CF740P2B | 44 | 196 | 2½” | 7 x 40″ |
Custom systems are available on request. Flow rates are given by SATEPA at the stated UV dose; we size each unit to your actual water quality.
Applications in Oman
- Pre-filtration ahead of commercial and industrial RO plants
- Polishing after sand and multimedia filters
- Pool and fountain filtration
- Process water in food, beverage and chemical plants
Choosing the Right Model
Model selection depends on peak flow rate, the amount of suspended solids, the micron rating you need and the operating pressure. In Oman, well and tanker water often carries sand, silt and rust, so a coarser first stage protects finer filters and RO membranes downstream. Send us your flow rate and application and our engineers will recommend the housing size and filter media. Learn more about water filtration.
Installation and Maintenance
- Install after pre-filtration, with a bypass line and isolation valves for service
- Replace UV lamps every 9,000 hours (14,000 hours for amalgam), about once a year in continuous use
- Clean the quartz sleeve every 3 to 6 months, more often with hard water
- Keep the controller and ballast in a dry, ventilated place
Why Buy SS cartridge filter housing Oman Equipment from UV Water Systems
UV Water Systems is an ISO 9001:2015 certified water treatment company in Muscat with 14+ years in Oman. We offer site survey, sizing, installation, spare cartridges and filter bags from stock, and annual maintenance contracts. See our other filter housings or contact us for a quotation.
Frequently Asked Questions
Which micron rating should I use?
For RO pre-filtration, 5 micron is standard. We can supply PP, pleated and wound cartridges in 1 to 50 micron to suit the housing.
Is SATEPA equipment made in Italy?
Yes. SATEPA Srl manufactures its UV sterilizers, ballasts and controllers in San Giovanni in Persiceto, Bologna, Italy.
Do you deliver and install outside Muscat?
Yes. We supply and install across Oman, including Sohar, Nizwa, Sur, Salalah and Duqm. Call or WhatsApp +968 9763 7786 for pricing.
Reviews
There are no reviews yet.