DuPont Filmtec Domestic RO Membrane TW30-1812

Genuine DuPont Filmtec RO membrane TW30-1812, 100 GPD (approx. 380 litres/day) with 99% salt rejection. Fits all standard 1812 housings and suits Oman feed water up to 2,000 ppm TDS. In stock in Muscat with installation and after-sales support from UV Water Systems.

Description

The DuPont Filmtec RO membrane TW30-1812 (100 GPD) is the genuine replacement element used in domestic and light commercial reverse osmosis systems across Oman. It produces roughly 380 litres of purified water per day at 99% nominal salt rejection, twice the output of the standard 50 GPD element, in exactly the same 1.8 x 12 inch format. UV Water Systems stocks it in Muscat as a direct upgrade for households whose water use has outgrown their original system.

DuPont Filmtec RO membrane TW30-1812 100 GPD supplied in Oman by UV Water Systems

Why a DuPont Filmtec RO Membrane Suits Oman Water

Groundwater and tanker-supplied water in Oman commonly runs between 500 and 2,000 ppm TDS, with high seasonal temperatures that accelerate membrane fouling. A thin-film composite element built to DuPont’s manufacturing tolerances holds its rejection rate under those conditions instead of drifting down after a few months.

Most villas and apartments here were commissioned with a 50 GPD element, which suits a family of three or four. Once the household grows, or the kitchen starts feeding a coffee machine and an ice maker, flow at the tap drops and the storage tank never fully recovers. Fitting the 100 GPD DuPont Filmtec RO membrane doubles daily output without replacing the system.

Technical Specifications

  • Model: DuPont Filmtec TW30-1812-100
  • Type: Thin-film composite (TFC) polyamide, tap water grade
  • Permeate Flow: 100 GPD (approx. 380 litres/day) at 60 psi, 25 C, 250 ppm NaCl
  • Salt Rejection: 99% nominal
  • Active Membrane Area: 1.3 sq ft (0.12 m²)
  • Dimensions: 1.8 inch diameter x 12 inch length
  • Max Feed Pressure: 125 psi
  • Max Feed Temperature: 45 C
  • Max Feed TDS: 2,000 mg/L
  • Compatibility: All standard 1812 membrane housings
  • Supply: ISO 9001:2015 certified supply chain, UV Water Systems Muscat

Where This Membrane Is Used in Muscat and Across Oman

Larger households of five or more people, home offices, nurseries, small guesthouses, cafe beverage stations, ice makers, and any point-of-use system that needs 100 GPD from a compact 1812 element. It is also the standard element we fit in under-sink RO units serving a single high-demand outlet.

Installation and Replacement

Fitting takes a few minutes. Shut the feed valve, depressurise the system, open the housing, remove the spent element, and press the new one home until both brine seals seat. Flush to drain for 20 to 30 minutes before drawing water for drinking.

Under Oman feed water conditions we recommend replacing the element every 12 to 24 months, or sooner if product TDS rises above 10% of feed TDS. Sediment and carbon pre-filters should be changed every six months. Chlorine will destroy a polyamide element, so a working carbon pre-filter is not optional.

Frequently Asked Questions

Will a 100 GPD element fit my existing 50 GPD housing?
Yes. The TW30-1812 uses the same 1.8 x 12 inch format and drops straight into any standard 1812 housing. Check that the pre-filters and storage tank suit the higher flow. Call +968 9763 7786 if you are unsure.

Why choose a DuPont Filmtec RO membrane over a generic element?
Genuine Filmtec elements are made to consistent thin-film specifications and deliver predictable rejection and flow across their rated life. Generic elements often test at 85 to 90% rejection and fail early. Our warranty applies only to genuine Filmtec membranes.

Do you deliver and install across Oman?
Yes. We cover all Muscat governorate areas including Al Khuwair, Ruwi, Al Hail, Seeb, Bausher, and Amerat, with delivery to Sohar, Nizwa, Salalah, and Sur.

How do I know the membrane needs changing?
Test the TDS of the product water with a handheld meter. If it exceeds 10% of the feed TDS, or if the tank takes noticeably longer to fill, the element is spent.

Buy the DuPont Filmtec RO Membrane in Oman

UV Water Systems is an ISO 9001:2015 certified water treatment company in Muscat with more than 14 years in the trade. We supply, install, and service water treatment systems for residential, commercial, and industrial clients throughout Oman, and we hold genuine Filmtec stock locally so there is no waiting on shipment.

Technical specifications are published by DuPont Water Solutions. For fitting, servicing, or a full system, see our RO systems range and replacement filter cartridges.

Call +968 9763 7786 or email sales@waterfilteroman.com for pricing and same-week delivery in Muscat.