Description
The axial piston pump AXI 1500 is an oil-free, high-pressure pump for seawater and brackish water reverse osmosis plants. It delivers up to 13.5 m³/h at 1,500 rpm and up to 70 bar continuous outlet pressure, with every wetted part made in Duplex and Super Duplex stainless steel. UV Water Systems supplies, installs and services this axial piston pump across Muscat and the Sultanate of Oman for desalination plants, hotels, camps, industrial sites and marine projects.
Oman relies heavily on desalinated water, and much of its groundwater is brackish with TDS well above 2,000 ppm. The high-pressure pump is the heart of any RO plant and the largest power consumer. A compact, efficient axial piston pump cuts energy cost, removes oil changes from the service plan and keeps the plant running in hot coastal conditions.
On this page
- Axial piston pump features and benefits
- Axial piston pump technical specifications
- Applications in Oman
- Installation, filtration and service
- Why buy from UV Water Systems
Axial Piston Pump Features and Benefits
This axial piston pump works on the positive displacement principle. Flow is proportional to shaft speed, so you can set the exact flow your RO membranes need by changing motor speed with a VFD.
- Oil-free, water-lubricated design – the pumped water lubricates all moving parts. No oil, no oil changes and no risk of oil contaminating permeate.
- Super Duplex and Duplex construction – wetted parts are made in Duplex (EN 1.4462 / UNS S31803-S32205), Super Duplex (EN 1.4410 / UNS S32750) and carbon-reinforced PEEK for strong resistance to seawater corrosion.
- Compact and light – one of the smallest and lightest pumps in its class at only 75 kg, which saves skid space and simplifies handling.
- High efficiency – about 29 kW at full speed and 60 bar, lowering the energy cost per m³ of fresh water.
- Very low pulsation – insignificant pressure pulsations protect membranes, pipework and instruments, so no pulsation dampener is normally required.
- Integrated flushing valve – lets water flow from inlet to outlet when the pump is stopped, so you can flush the system with fresh water without extra valves.
- Long service life – no preventive maintenance is needed during the warranty period.
- Flexible drive – runs from an electric motor, or from a combustion engine with a suitable coupling for remote sites.

Axial Piston Pump Technical Specifications
| Parameter | Value |
|---|---|
| Model | AXI 1500 (code 51500MVBP001) |
| Pump type | Axial piston, fixed positive displacement |
| Geometric displacement | 166 cm³/rev (10.1 in³/rev) |
| Rated flow at 1,500 rpm (60 bar) | 13.5 m³/h (59.3 gpm) |
| Flow at 1,480 rpm | 230 L/min (13.8 m³/h) |
| Outlet pressure, minimum | 30 bar (435 psi) |
| Outlet pressure, maximum continuous | 70 bar (1,015 psi) |
| Inlet pressure, minimum | 2 bar (29 psi) |
| Inlet pressure, maximum continuous / peak | 5 bar (72.5 psi) / 10 bar (145 psi) |
| Speed range, continuous | 700 – 1,500 rpm |
| Power at max speed and 60 bar | 29 kW (38.9 hp) |
| Power at 70 bar / 80 bar | 34 kW / 38 kW |
| Torque at 60 bar | 179 Nm (132 lbf-ft) |
| Fluid and ambient temperature | +2 °C to +50 °C |
| Storage temperature | -40 °C to +70 °C (drained and plugged) |
| Noise level at 1 m | 81 dB(A) at 60 bar; 85 dB(A) at 80 bar |
| Required inlet filtration | 10 µm absolute |
| Lubrication | By the pumped water (oil-free) |
| Wetted materials | Duplex, Super Duplex stainless steel, carbon-reinforced PEEK |
| Flushing valve | Integrated |
| Weight | 75 kg (165 lb) |
| Design standard | EN 809 |
How to size the pump
Because the flow-to-rpm ratio is constant, required speed = required flow × rated rpm ÷ rated flow. For example, 9 m³/h needs about 1,000 rpm. Required power (kW) = L/min × bar ÷ 478. Our engineers check this sizing against your RO design before we quote.
Axial Piston Pump Applications in Oman
- Seawater reverse osmosis (SWRO) plants for hotels, resorts, islands and coastal villas
- Brackish water reverse osmosis (BWRO) plants for farms, factories and camps in the interior
- Containerised and mobile desalination units for oil and gas sites
- Marine and offshore watermakers
- High-pressure salt water pumping and other high-pressure water systems
- Replacement of older plunger or multistage centrifugal high-pressure pumps
See our full range of seawater desalination systems and industrial RO plants.
Installation, Filtration and Service
Water has very low viscosity, so the pump runs with very tight internal clearances. Good pre-treatment protects it:
- Install a 10 µm absolute cartridge filter ahead of the pump inlet and keep the inlet pressure between 2 and 5 bar.
- Mount the motor and pump on a frame with anti-vibration mounts and use flexible hoses to reduce noise.
- Never run the pump dry. Bleed air through the bleeding plug before first start.
- When running on seawater, flush with fresh water at every stop to prevent crevice corrosion.
- Check the shaft seal and inspect wear parts at the intervals in the service plan.
More background on how RO high-pressure pumps work is available on Wikipedia – Reverse osmosis.
Scope of supply
- Axial piston pump AXI 1500 with integrated flushing valve
- Optional: bell housing, coupling, electric motor, VFD, base frame and pressure instruments
- Installation and commissioning by our team in Oman (quoted separately)
Why Buy Your Axial Piston Pump from UV Water Systems
UV Water Systems is an ISO 9001:2015 certified water treatment company in Muscat. We design, build and maintain RO and desalination plants for hotels, hospitals, schools and industrial clients across Oman. When you buy this axial piston pump from us, you get correct sizing for your plant, professional installation, fast access to spare parts and after-sales service from our own technicians.
Prices depend on configuration (pump only, or complete motor-pump unit). Contact us or call +968 9763 7786 for a free consultation and quotation.





Reviews
There are no reviews yet.