Seko Invikta Solenoid Dosing Pump

Description

042 | UV Water Systems Oman

The Seko Invikta solenoid dosing pump (2 L/hour) is a compact, economic metering pump for low-flow chemical injection applications — RO antiscalant dosing on small residential systems, pH correction on compact water softeners, and chlorine dosing on small municipal supply points. UV Water Systems Muscat supplies the Invikta as the entry-level Seko dosing solution for Oman’s residential and small commercial water treatment applications.

Why This Matters for Oman Water Quality

At 2 L/hour maximum output, the Invikta is calibrated for systems where the dose rate is measured in millilitres per hour — antiscalant dosing on a 5–10 m³/day RO at 5–10 mg/L requires only 25–100 mL/hour of chemical injection. The Invikta’s fine adjustment allows the user to dial in the exact dose. The solenoid mechanism provides lower cost than the Tekna’s electromagnetic actuator, making it an economical choice for applications where ±5% dosing accuracy (rather than ±3%) is acceptable.

Technical Specifications

• Brand: Seko — Italy
• Model: Invikta solenoid dosing pump
• Max Flow: 2 L/hour
• Max Pressure: 8 bar
• Adjustment: Manual stroke length 0–100%, stroke frequency 0–100%
• Power: 220V / 50Hz
• Wetted Materials: PVC, PTFE diaphragm
• Accuracy: ±5%
• Footprint: Very compact — mounts directly on dosing tank
• Standard: Designed to Oman / GCC industry requirements
• Quality: ISO 9001:2015 certified supply chain — UV Water Systems, Muscat

Applications in Muscat & Oman

Antiscalant dosing on residential and small commercial RO systems in Muscat and Oman, pH adjustment on small softeners, chlorine dosing on community water supply points, biocide dosing on small cooling towers, and any application requiring 0.1–2.0 L/hour chemical injection.

Frequently Asked Questions

How do I calibrate the dosing rate on a Seko Invikta? Set the desired stroke frequency as a percentage of maximum (0–100%), measure the actual output into a calibration cylinder over a set time (e.g., 1 minute), and adjust stroke length until the measured output matches the target dose rate. UV Water Systems provides calibration guidance during installation. Call +968 9763 7786 for support.

Can I control this pump from an external signal? The Seko Invikta is primarily a manual-control pump — it does not have a standard 4–20mA input. For proportional control from a flow meter pulse or 4–20mA signal, UV Water Systems recommends upgrading to the Seko Tekna, which includes these control inputs as standard. Call +968 9763 7786 for a comparison.

Do you deliver and install across Oman? Yes — UV Water Systems covers all Muscat governorate areas and ships products and spare parts to all wilayats in Oman. Call +968 9763 7786 or email sales@waterfilteroman.com.

UV Water Systems is an ISO 9001:2015 certified water treatment company based in Muscat, Sultanate of Oman, with 14+ years of experience. We supply, install, and service complete water treatment solutions for residential, commercial, and industrial clients across Oman. Call +968 9763 7786 or visit www.uvwater.biz.