JM FRP Tank – 6 to 72 Inch Pressure Tanks (JM-S, JM-H, JM-D Series)

JM FRP tank range from 6 to 72 inch diameter, rated for 150 psi and certified to ISO, NSF and CE. UV Water Systems supplies this FRP tank in Oman for softeners, sand filters, carbon filters and RO pretreatment.

Description

JM FRP Pressure Tank, a FRP tank from Jieming International (JM), is a PE-lined pressure vessel wound with fibreglass-reinforced plastic filament. JM offers more than 80 sizes from 6 to 72 inch diameter in the JM-S, JM-H and JM-D series. UV Water Systems supplies it across Oman, including Muscat, Sohar, Nizwa and Salalah.

FRP Tank – JM FRP Pressure Tank supplied by UV Water Systems Oman

Why Choose This FRP Tank in Oman?

Many villas, hotels and factories in Oman depend on hard groundwater or tanker water, so softeners, sand filters and carbon filters are standard equipment. An FRP tank does not rust in coastal humidity, weighs far less than a steel vessel, and is easy to carry up to a rooftop or into a tight plant room. With sizes from small residential tanks to 72 inch industrial vessels, one range covers most of the projects we build.

Key Features

  • PE liner with FRP filament winding
  • More than 80 sizes from 6 to 72 inch diameter
  • Colours: natural, grey, blue, white, black or almond
  • ISO, NSF and CE certified
  • Corrosion resistant, light and easy to transport and install
  • JM-D series with a side discharge port for easier media removal
  • OEM service available

Applications

  • Water softeners for villas, hotels and laundries
  • Sand, multimedia and activated carbon filters
  • Iron removal filters
  • Cation, anion and mixed bed DM units
  • RO plant pretreatment

Models and Technical Data

Brand JM (Jieming International)
Product type FRP Tank
Supplier in Oman UV Water Systems (Uniqueness View LLC)
Operating pressure 150 psi (10.5 bar)
Operating temperature 1–49 °C
Maximum vacuum 5 in Hg (127 mm Hg)
Lowest exposing temperature -27 °C
Fatigue test Over 100,000 cycles from 0–150 psi
Burst test 600 psi (4 times operating pressure)
Openings 2.5″ NPSM, 4″-8UN or 6″ flange, depending on size
Model Size (inch) Volume (L) Top opening Base
0844/2.5T 8 x 44 31.3 2.5″ NPSM PP round
1054/2.5T 10 x 54 61.9 2.5″ NPSM PP round
1252/2.5T 12 x 52 84.8 2.5″ NPSM PP round
1465/4T 14 x 65 145.6 4″-8UN PP round
1665/4T 16 x 65 187.7 4″-8UN PP round
2472/4T 24 x 72 427 4″-8UN FRP tripod
3072/4T4B 30 x 72 690 4″-8UN top and bottom FRP tripod
3672/4T4B 36 x 72 850 4″-8UN top and bottom FRP tripod
4872/6T6B 48 x 72 1308 6″ flange top and bottom FRP tripod
6094/6T6B 60 x 94 2688 6″ flange top and bottom FRP tripod
72110/6T6B 72 x 110 4670 6″ flange top and bottom FRP tripod

Sizing, Installation and Service

We size the FRP tank from your flow rate, the media volume needed and the backwash rate, then match it with a Runxin, Clack or Fleck control valve, distributor and media. Tell us the daily water use, inlet pressure and a water test result, and we will recommend the tank size, valve and media for your site.

Buy JM Products in Muscat, Oman

UV Water Systems has supplied and serviced water treatment equipment in Oman for 14+ years and is ISO 9001:2015 quality certified. Our technicians cover Muscat and the wider country for delivery, installation and after-sales support. Browse more equipment on Water Filter Oman or visit our online shop, and send us your requirement for a quotation on this FRP tank.

Call or WhatsApp: +968 9763 7786 | Email: sales@waterfilteroman.com

Frequently Asked Questions

Which FRP tank size do I need for a villa softener?

Most villa softeners use tanks between 10 x 54 and 14 x 65 inch, but the right size depends on water hardness and daily use. Share a water test and the number of occupants and we will size it.

Can a JM FRP tank be used for activated carbon and sand filters?

Yes. The same tanks hold softener resin, activated carbon, sand, multimedia and DM resins. Larger sizes come with top and bottom openings for media loading and removal.

Reviews

There are no reviews yet.

Be the first to review “JM FRP Tank – 6 to 72 Inch Pressure Tanks (JM-S, JM-H, JM-D Series)”

Your email address will not be published. Required fields are marked *