Description
Pool UV sterilizer Oman: the SATEPA Pool Series from SATEPA Srl, Italy, is built for residential pools, villa pools, hotel pools and spas. UV-C light breaks down combined chlorine (chloramines), the cause of red eyes, skin irritation and the strong chlorine smell, and it inactivates bacteria and viruses so the pool needs less chlorine.
SATEPA has designed UV electronics since 2007 and manufactures UV sterilizers from 0 to 600 m³/h in Bologna, Italy, using its own ballasts and controllers. UV Water Systems supplies, installs and services SATEPA equipment across the Sultanate.
How the SATEPA Pool Series Works
UV-C light at 253.7 nm disrupts the DNA and RNA of bacteria, viruses and protozoa so they cannot reproduce. Treatment happens instantly as water passes the lamps, with no chemicals added, no change in taste or odour, and no harmful by-products. For reliable results the water should be clear and pre-filtered, with low iron and manganese and good UV transmittance.
Key Features of the Pool UV sterilizer Oman Range
- Flow rate up to 22 m³/h (96.9 GPM) at 300 J/m²
- Breaks down combined chlorine and chloramines
- LED through-cable ballast or UV³ LCD controller
- Low pressure UV-C lamps with 9,000 hours lifespan and end-of-life monitoring
- Flow switch connection
- AISI 304 reactor, optional AISI 316 or HDPE
- Optional irradiance and temperature sensor, optional flanged inlet/outlet
Models and Technical Specifications
| Model | Flow (m³/h) | Flow (GPM) | Lamp | Inlet/Outlet | Ballast/Control |
|---|---|---|---|---|---|
| L11-POOL | 11.0 | 48.40 | 1 x 40 W | 1½” | LED |
| L16-POOL | 16.0 | 70.45 | 1 x 80 W | 1½” | LED |
| L22-POOL | 22.0 | 96.90 | 2 x 80 W | 1½” | UV³ |
Custom systems are available on request. Flow rates are given by SATEPA at the stated UV dose; we size each unit to your actual water quality.
Applications in Oman
- Private villa swimming pools
- Hotel, club and compound pools
- Spas, jacuzzis and splash pads
- Indoor pools where chloramine smell is a problem
Choosing the Right Model
Model selection depends on peak flow rate, water source (municipal, well, tanker or seawater), UV transmittance, temperature and the required dose. In Oman, well and tanker water often carries iron, hardness or turbidity, so we check pre-treatment as part of every proposal. Send us your flow rate and a recent water test report and our engineers will recommend the model and the filters or softener needed ahead of it. Learn more about ultraviolet germicidal irradiation.
Installation and Maintenance
- Install after pre-filtration, with a bypass line and isolation valves for service
- Replace UV lamps every 9,000 hours (14,000 hours for amalgam), about once a year in continuous use
- Clean the quartz sleeve every 3 to 6 months, more often with hard water
- Keep the controller and ballast in a dry, ventilated place
Why Buy Pool UV sterilizer Oman Equipment from UV Water Systems
UV Water Systems is an ISO 9001:2015 certified water treatment company in Muscat with 14+ years in Oman. We offer site survey, sizing, installation, spare lamps and quartz sleeves from stock, and annual maintenance contracts. See our other UV systems or contact us for a quotation.
Frequently Asked Questions
Does a UV sterilizer replace chlorine in my pool?
No. You still need a small chlorine residual, but UV removes chloramines and most pathogens, so chlorine use and irritation drop noticeably.
Is SATEPA equipment made in Italy?
Yes. SATEPA Srl manufactures its UV sterilizers, ballasts and controllers in San Giovanni in Persiceto, Bologna, Italy.
Do you deliver and install outside Muscat?
Yes. We supply and install across Oman, including Sohar, Nizwa, Sur, Salalah and Duqm. Call or WhatsApp +968 9763 7786 for pricing.
Reviews
There are no reviews yet.