Flow meter Oman Muscat – Acrylic Rotameter Flow Meter – 1 to 5 GPM | UV Water Systems Oman

In an RO water treatment system, flow rate is everything — it determines the recovery ratio, the pressure drop across the membrane, the concentrate-to-permeate flow balance, and the actual daily production volume of treated water. Without a flow meter, the operator is flying blind: they cannot tell whether the system is producing its rated volume or whether declining performance has cut output by 30%.

The acrylic rotameter flow meter supplied by UV Water Systems in Muscat provides a direct visual indication of volumetric flow rate in the 1–5 GPM range — perfectly suited for monitoring permeate flow, concentrate (reject) flow, and feed water flow in residential and small commercial RO systems across Oman. A rotameter requires no electrical power — the float rises and falls in the tapered clear acrylic tube as flow changes, providing a continuous visual reading that operators can check at a glance during routine rounds or during system troubleshooting.

How Rotameters Measure Flow

A rotameter (also called a variable area flow meter) consists of a vertically mounted tapered transparent tube with a float inside. Water flows upward through the tube, and the float rises to a height where the upward drag force from the flowing water exactly balances the float’s weight. At higher flow rates, the float rises higher; at lower flow rates, it falls lower. The graduated scale on the tube converts float height to volumetric flow rate in GPM or LPM.

Because the float position is a direct mechanical response to flow rate, the rotameter needs no electronics, no power supply, and no signal conditioning — it is completely self-contained and will indicate flow correctly for the instrument’s service life without calibration drift. This makes rotameters the preferred choice for field-installed flow indication in Oman’s water treatment systems where electrical power at the flow measurement point may be inconvenient or unavailable.

Key Features and Benefits Flow meter Oman Muscat

1–5 GPM range for RO system monitoring: Covers the permeate and concentrate flow rates of standard 50–200 GPD residential and small commercial RO systems — the most common RO size range installed by UV Water Systems across Muscat for homes, small offices, and cafes.
No power required — purely mechanical: Rotameter operation is completely mechanical — no batteries, no power supply, no signal cable — works anywhere water flows regardless of electrical infrastructure, ideal for outdoor tank supply points and roof-mounted installations in Oman where wiring is impractical.
Clear acrylic tube for direct visual reading: The transparent acrylic body allows direct visual observation of the float position — operators can read the flow rate from a distance and observe the float movement (stable position = stable flow; oscillating float = pump cavitation or membrane channelling) without instruments.
Essential for RO concentrate ratio balancing: The concentrate-to-permeate ratio in an RO system (recovery) must be set correctly during commissioning to prevent membrane scaling. A pair of rotameters on the permeate and concentrate lines allows the technician to read both flows simultaneously and adjust the reject control valve for the correct recovery percentage.
Stainless steel connections for durability: End fittings in stainless steel or nickel-plated brass — corrosion-resistant in the chlorinated and brine-flushed water conditions encountered in RO concentrate streams where acidity and salt concentration can attack standard brass fittings.

Technical Specifications

Specification	Detail
Measurement Range	1.0 – 5.0 GPM (Approx. 3.8 – 18.9 Liters/Minute)
Body Material	Machined Cast Acrylic (Transparent)
Float & Guide Rod	316 Stainless Steel
Connection Standard	BSP / NPT threaded metric standard
Maximum Operating Pressure	10 Bar (approx. 145 PSI)
Maximum Operating Temperature	60°C (140°F)
Accuracy	± 5% of full scale

Applications Across Oman Flow meter Oman Muscat

The 1–5 GPM acrylic rotameter is used in residential RO system permeate and concentrate flow monitoring, small commercial RO commissioning, UV sterilizer flow verification, and chemical dosing pump output checking across Muscat. UV Water Systems installs rotameters on all commercial RO systems as part of the standard instrumentation package — contact +968 9763 7786 for supply and installation.

Frequently Asked Questions

How do I use a rotameter to check my RO system performance? With the system running normally, note the permeate flow (rotameter 1) and concentrate flow (rotameter 2). Calculate recovery = permeate / (permeate + concentrate) × 100. Standard residential RO recovery is 25–35%. If permeate flow has dropped from its commissioning value by more than 15% at the same feed pressure, the membrane may be fouled — call UV Water Systems for a membrane assessment.

Flow meter Oman Muscat Can acrylic rotameters be used with warm or hot water? Standard acrylic rotameters are rated for water temperatures up to 60°C — suitable for ambient temperature service in Oman (water supply temperatures up to 40–45°C in summer). For hot water above 60°C (boiler feed, hot process water), UV Water Systems specifies borosilicate glass rotameters with higher temperature ratings.

UV Water Systems is an ISO 9001:2015 certified water treatment company based in Muscat, Sultanate of Oman, with 14+ years of experience. We supply, install, and service water treatment solutions for residential, commercial, and industrial clients across Oman. Call +968 9763 7786 or visit www.uvwater.biz.

RO Flow Meter

Acrylic Rotameter Flow Meter 1 to 5 GPM – UV Water Systems Oman