Industrial Multi-Lamp UV Sterilizer – 10 m³/hour | UV Water Systems Oman

Industrial water treatment systems in Oman — hospitals, food factories, pharmaceutical plants, oil and gas camps, and large hotel complexes — require continuous high-flow UV disinfection that light commercial units cannot provide. A 10 m³/hour (167 L/min) multi-lamp UV sterilizer handles the volume required for RO permeate disinfection, storage tank outlet treatment, and distribution line protection at these scale facilities. The industrial multi-lamp UV sterilizer supplied by UV Water Systems in Muscat is a heavy-duty stainless steel chamber with multiple high-output germicidal lamps (Philips or Osram, 254 nm) delivering the validated ≥40 mJ/cm² UV dose across the full 10 m³/hour flow range. This unit is engineered for 24-hour continuous operation at Oman’s industrial and healthcare facilities.

Multi-Lamp Industrial UV Design

At 10 m³/hour flow rate, the hydraulic residence time within a single-lamp chamber is too short to achieve adequate UV dose without impractically high lamp wattage. Multi-lamp industrial UV units use several medium or high-pressure germicidal lamps arranged radially around the flow path, providing multiple UV exposures as water moves through the chamber. Each lamp contributes its UV dose, and the cumulative exposure delivers ≥40 mJ/cm² even at rated maximum flow. Industrial units include UV intensity monitoring, lamp failure alarms, and flow totalisation — features required for documentation in hospital HACCP water safety plans and pharmaceutical water quality records. UV Water Systems commissions all industrial UV installations with dose validation testing using biodosimetry or MS2 bacteriophage challenge methods.

Key Features and Benefits

10 m³/hour (167 L/min) continuous flow: Handles RO permeate flow from a 5,000–8,000 LPH industrial RO plant operating continuously — sized for the actual output of industrial water treatment systems in Oman’s healthcare and food manufacturing sectors.
Multi-lamp redundancy: If one lamp fails, remaining lamps continue to provide partial UV dose while replacement is arranged — the system does not immediately lose disinfection capability, providing operational continuity for critical facilities.
UV intensity monitoring and alarming: Continuous UV sensor output is displayed and alarmed — essential for hospitals and food factories where process water records must be maintained and auditable for regulatory compliance in Oman.
Heavy-duty 304/316L stainless construction: Industrial chamber wall thickness and sanitary end cap design for 24/7 continuous operation — built for the operating conditions of Oman’s industrial water treatment plants, not adapted from residential products.
Serviceable without system shutdown: Lamp removal and replacement via isolation valve and lamp port without draining the chamber — minimising system downtime during annual maintenance at critical facilities.

Technical Specifications

Flow rate: 10 m³/hour (167 L/min)
UV dose: ≥40 mJ/cm² at rated flow
UV wavelength: 254 nm (germicidal)
Chamber material: 304/316L stainless steel
Lamps: Multiple Philips/Osram germicidal lamps
Controls: UV intensity monitor, lamp failure alarm, flow switch

Applications Across Oman

UV Water Systems has installed industrial UV sterilizers at hospitals (Oman International Hospital, Women’s International Hospital), hotel complexes, food production facilities, and industrial RO plants across Muscat. We carry out industrial UV system design, supply, installation, commissioning, and annual maintenance under AMC contracts. Dose validation certificates are issued for all industrial UV installations.

Frequently Asked Questions

What pre-treatment is required before an industrial UV sterilizer? Feed water must have turbidity below 1 NTU, UVT ≥ 85%, and iron concentration below 0.3 mg/L for effective dose delivery. For RO permeate, these parameters are easily met. For tank outlet or pre-treated surface water, a multimedia and carbon pre-filter is required. UV Water Systems designs the complete pre-treatment system as part of the UV installation.

Does UV Water Systems provide dose validation certificates? Yes — UV Water Systems issues UV dose validation documentation using calibrated UV intensity measurement at the time of commissioning. This satisfies audit requirements for hospital water safety plans and food factory water quality records under Oman’s health and food safety regulations.

UV Water Systems is an ISO 9001:2015 certified water treatment company based in Muscat, Sultanate of Oman, with 14+ years of experience. We supply, install, and service water treatment solutions for residential, commercial, and industrial clients across Oman. Call +968 9763 7786 or visit www.uvwater.biz.

10 m3 UV

Industrial Multi-Lamp UV Sterilizer 10 m3 per hour – UV Water Systems Oman