Two-Bed DM Plant – 1 m³/hour

Description

026 | UV Water Systems Oman

Demineralised water — free of virtually all dissolved salts and minerals — is essential for Oman’s laboratories, pharmaceutical operations, electronics manufacturing, and boiler systems where mineral deposition causes fouling or affects process quality. The two-bed DM plant (1 m³/hour) from UV Water Systems Muscat uses sequential strong acid cation (SAC) and strong base anion (SBA) exchange resin vessels to produce water with conductivity below 10 µS/cm — suitable for most laboratory and industrial applications.

Why This Matters for Oman Water Quality

Unlike softening, which replaces hardness ions with sodium, demineralisation removes all ionic species — calcium, magnesium, sodium, chloride, sulphate, bicarbonate — through two-stage ion exchange. The cation vessel exchanges all cations for hydrogen (H⁺); the anion vessel exchanges all anions for hydroxyl (OH⁻). These ions combine to form pure water (H₂O). The result is high-purity water used as boiler feed, battery water, rinse water in electronics assembly, and reagent-grade laboratory water in Oman’s growing research sector.

Technical Specifications

• Production Rate: 1 m³/hour
• Cation Vessel: FRP vessel with strong acid cation (SAC) resin
• Anion Vessel: FRP vessel with strong base anion (SBA) resin
• Product Conductivity: <10 µS/cm (typical)
• Regenerants: HCl or H₂SO₄ (cation) + NaOH (anion)
• Controls: Manual valves with conductivity alarm at outlet
• Piping: Chemical-resistant UPVC
• Safety: Acid/alkali dilution system for safe chemical handling
• Standard: Designed to Oman / GCC industry requirements
• Quality: ISO 9001:2015 certified supply chain — UV Water Systems, Muscat

Applications in Muscat & Oman

Oman and Muscat laboratories, pharmaceutical clean room water, boiler feed water, battery manufacturing, electronics assembly rinse water, textile dyeing, and analytical chemistry applications requiring low-conductivity process water.

Frequently Asked Questions

How often does a two-bed DM plant need chemical regeneration? Regeneration frequency depends on feed water ionic load and daily production volume. At 1 m³/hour continuous operation from Muscat tap water (~200 mg/L TDS), a typical two-bed DM plant requires regeneration every 3–7 days. UV Water Systems provides a full operating cost estimate, including chemical consumption, at the proposal stage.

Can UV Water Systems supply the regeneration chemicals? Yes — UV Water Systems supplies HCl (hydrochloric acid), H₂SO₄ (sulphuric acid), and NaOH (sodium hydroxide) for DM plant regeneration in Muscat. All chemicals are supplied in appropriate HDPE containers with safety data sheets. Delivery to Oman industrial sites is available. Call +968 9763 7786.

Do you deliver and install across Oman? Yes — UV Water Systems covers all Muscat governorate areas and ships products and spare parts to all wilayats in Oman. Call +968 9763 7786 or email sales@waterfilteroman.com.

UV Water Systems is an ISO 9001:2015 certified water treatment company based in Muscat, Sultanate of Oman, with 14+ years of experience. We supply, install, and service complete water treatment solutions for residential, commercial, and industrial clients across Oman. Call +968 9763 7786 or visit www.uvwater.biz.